Sensograph Packaging Technology Private Limited
Bhandup West, Mumbai, Maharashtra
GST No. 27AALCS4099P1ZB
TrustSEAL Verified
Call 0804764123382% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Sensograph Packaging |
| Capacity | 25 Liters |
| Power Consumption | 415 VAC,Three Phase. |
| Automation Grade | Semi-Automatic |
| Driven Type | Electric |
Features
Benefits :
Technical Specification
Product | For packing powders such as Turmeric, Chilly, Wheat Flour, Atta, Besan, etc. |
Hopper Capacity | 25 Liters |
Weighing Range | 10 gms to 100 gms |
| 100 gms to 1 kg, 1 kg to 5 kg |
Output (kg/hr) | 72* (For 100 gms) |
| 500* (For 1 kg) |
Type of Bags | Open mouth preformed bags/pouch of LD, PP etc. |
Power requirement | 415 VAC, Three Phase. |
Material Construction | All contact parts SS304 & other parts of MS. |
Export Packing Size | 3.5’ (W) x 4’ (D) x 8’ (H) |
Net Weight (kg) | 200 |
Gross Weight (kg) | 350 |
* depending upon product & set weight. | |
A separate screw conveyor to feed auger hopper is recommended to maintain product level in auger hopper. | |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Machine Capacity | 25 Liters |
| Pouch Capacity | 50-200 grams, 400-600 grams, 600-1000 grams, 10-50 grams, 200-400 grams |
| Capacity (pouch per hour) | 0-500,500-1000,1000-2000 |
| Automation Grade | Automatic, Semi-Automatic |
| Power | 3 phase |
| Pouch Length | 2"-4",4"-6",6"-8",8"-10",10"-12" |
| Brand | Sensograph Packaging |
| Machine Power | 1-2 HP |
| Driven Type | Electric |
| Automatic Grade | Semi-Automatic |
| Condition | New |
In auger filler machine, the material to be filled is stored in the hopper. The stirrer of the machine facilitates the prevention of any bridging of the material. The Servo motor drive of the machine provides the perfection of accuracy and speed of the machine.
This machine is suitable for packing of :
| TECHNICAL SPECIFICATION OF MACHINE: | |
| Product Characteristics | Powder form |
| Hopper Capacity | 25 Liters |
| Weighing Range | 5g to 5kg.* |
| Output | 72-1200 kg/hour. |
| Type of film | Heat sealable laminated plastic |
| Power Requirement | 415 VAC, Three phase |
| Material Construction | All contact parts SS304 & other parts of MS. |
| Roll width(mm) | 75 – 450 |
| Pouch length ( mm) | 150 to 330 |
| Vertical seal width(mm) | 10/15 typical |
| Horizontal Seal Width(mm) | 10/15 typical |
| Dimensions ( Floor Area) | 20 sq feet |
| Dimension ( Height) | 9 ft (Without Screw conveyor) |
| Power Supply | 3 Phase, 415 VAC |
| Air supply | 2 HP, 8 Bar Compressor |
| Film Draw mechanism | Servo /Stepper motor drive |
| Horizontal sealing mechanism | Pneumatic |
| Vertical seal mechanism | Pneumatic |
| Auger Screw Drive | Servo Drive |
| Hopper capacity | 25 Liters |
| Material of Construction | Powder coated MS frame with all contact parts in SS304 only. |
*Through different machine models.
Features:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Driven Type | Electric |
| Brand | Sensograph Packaging |
| Power Consumption | 1-2 HP |
| Condition | New |
| Capacity | 25 Liters |
| Automatic Grade | Semi-Automatic |
Features
Benefits :
Technical Specification
Product | For packing powders such as Turmeric, Chilly, Wheat Flour, Atta, Besan, etc. |
Hopper Capacity | 25 Liters |
Weighing Range | 10 gms to 100 gms |
| 100 gms to 1 kg, 1 kg to 5 kg |
Output (kg/hr) | 72* (For 100 gms) |
| 500* (For 1 kg) |
Type of Bags | Open mouth preformed bags/pouch of LD, PP etc. |
Power requirement | 415 VAC, Three Phase. |
Material Construction | All contact parts SS304 & other parts of MS. |
Export Packing Size | 3.5’ (W) x 4’ (D) x 8’ (H) |
Net Weight (kg) | 200 |
Gross Weight (kg) | 350 |
* depending upon product & set weight. | |
A separate screw conveyor to feed auger hopper is recommended to maintain product level in auger hopper. | |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Power Consumption | 250w |
| Brand | Sensograph Packaging |
This machine is suitable for packing of :
| TECHNICAL SPECIFICATION OF MACHINE: | |
| Product Characteristics | Powder form |
| Hopper Capacity | 25 Liters |
| Weighing Range | 5g to 5kg.* |
| Output | 72-1200 kg/hour. |
| Type of film | Heat sealable laminated plastic |
| Power Requirement | 415 VAC, Three phase |
| Material Construction | All contact parts SS304 & other parts of MS. |
| Roll width(mm) | 75 – 450 |
| Pouch length ( mm) | 150 to 330 |
| Vertical seal width(mm) | 10/15 typical |
| Horizontal Seal Width(mm) | 10/15 typical |
| Dimensions ( Floor Area) | 20 sq feet |
| Dimension ( Height) | 9 ft (Without Screw conveyor) |
| Power Supply | 3 Phase, 415 VAC |
| Air supply | 2 HP, 8 Bar Compressor |
| Film Draw mechanism | Servo /Stepper motor drive |
| Horizontal sealing mechanism | Pneumatic |
| Vertical seal mechanism | Pneumatic |
| Auger Screw Drive | Servo Drive |
| Hopper capacity | 25 Liters |
| Material of Construction | Powder coated MS frame with all contact parts in SS304 only. |
*Through different machine models.
Features:
* We Have Different Models Comprising Variable Production Requirement, for Small Grammages , High Grammage ,high Speed Models and Also Economical Models.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Capacity (pouch per hour) | 500-1000 |
| Machine Type | Automatic,Semi-Automatic |
| Capacity | 45 Liters |
| Power Consumption | 3 Phase |
| Automation Grade | Automatic |
| Pouch Capacity | 600-1000 grams |
| Brand | Sensograph Packaging |
| Accuracy (%) | Depending upon product and Grammage |
| Compressed Air Consumption (Mpa) | 2 HP |
| Packaging Range (mm) | 10 g to 5 kg |
| Machine Power | 1-2 HP |
| Packaging Speed (Bag per min) | 10-40 PPM |
| Pouch Counter | Yes |
| Condition | New |
In auger filler machine, the material to be filled is stored in the hopper. The stirrer of the machine facilitates the prevention of any bridging of the material. The Servo motor drive of the machine provides the perfection of accuracy and speed of the machine.
This machine is suitable for packing of :
| TECHNICAL SPECIFICATION OF MACHINE: | |
| Product Characteristics | Powder form |
| Hopper Capacity | 25 Liters |
| Weighing Range | 5g to 5kg.* |
| Output | 72-1200 kg/hour. |
| Type of film | Heat sealable laminated plastic |
| Power Requirement | 415 VAC, Three phase |
| Material Construction | All contact parts SS304 & other parts of MS. |
| Roll width(mm) | 75 – 450 |
| Pouch length ( mm) | 150 to 330 |
| Vertical seal width(mm) | 10/15 typical |
| Horizontal Seal Width(mm) | 10/15 typical |
| Dimensions ( Floor Area) | 20 sq feet |
| Dimension ( Height) | 9 ft (Without Screw conveyor) |
| Power Supply | 3 Phase, 415 VAC |
| Air supply | 2 HP, 8 Bar Compressor |
| Film Draw mechanism | Servo /Stepper motor drive |
| Horizontal sealing mechanism | Pneumatic |
| Vertical seal mechanism | Pneumatic |
| Auger Screw Drive | Servo Drive |
| Hopper capacity | 25 Liters |
| Material of Construction | Powder coated MS frame with all contact parts in SS304 only. |
*Through different machine models.
Features:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Sealing Type | Center Seal |
| Machine Capacity | 28 Litre |
| Brand | Sensograph Packaging |
| Machine Type | Automatic |
| Driven Type | Electric |
| Condition | New |
| Automatic Grade | Automatic |
| Pouch Counter | Yes |
In auger filler machine, the material to be filled is stored in the hopper. The stirrer of the machine facilitates the prevention of any bridging of the material. The Servo motor drive of the machine provides the perfection of accuracy and speed of the machine.
This machine is suitable for packing of :
| TECHNICAL SPECIFICATION OF MACHINE: | |
| Product Characteristics | Powder form |
| Hopper Capacity | 25 Liters |
| Weighing Range | 5g to 5kg.* |
| Output | 72-1200 kg/hour. |
| Type of film | Heat sealable laminated plastic |
| Power Requirement | 415 VAC, Three phase |
| Material Construction | All contact parts SS304 & other parts of MS. |
| Roll width(mm) | 75 – 450 |
| Pouch length ( mm) | 150 to 330 |
| Vertical seal width(mm) | 10/15 typical |
| Horizontal Seal Width(mm) | 10/15 typical |
| Dimensions ( Floor Area) | 20 sq feet |
| Dimension ( Height) | 9 ft (Without Screw conveyor) |
| Power Supply | 3 Phase, 415 VAC |
| Air supply | 2 HP, 8 Bar Compressor |
| Film Draw mechanism | Servo /Stepper motor drive |
| Horizontal sealing mechanism | Pneumatic |
| Vertical seal mechanism | Pneumatic |
| Auger Screw Drive | Servo Drive |
| Hopper capacity | 25 Liters |
| Material of Construction | Powder coated MS frame with all contact parts in SS304 only. |
*Through different machine models.
Features:
* We Have Different Models Comprising Variable Production Requirement, for Small Grammages , High Grammage ,high Speed Models and Also Economical Models.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Capacity (Pouch per hour) | 0-500 Pouch per hour, 500-1000 Pouch per hour |
| Machine Capacity | 25 Liters |
| Brand | Sensograph Packaging |
| Dimension(L*W*H) | 3.5 (W) x 4 (D) x 8 (H) |
| Driven Type | Electric |
| Automation Grade | Semi-Automatic |
| Condition | New |
Features
Benefits :
Technical Specification
Product | For packing powders such as Turmeric, Chilly, Wheat Flour, Atta, Besan, etc. |
Hopper Capacity | 25 Liters |
Weighing Range | 10 gms to 100 gms |
| 100 gms to 1 kg, 1 kg to 5 kg |
Output (kg/hr) | 72* (For 100 gms) |
| 500* (For 1 kg) |
Type of Bags | Open mouth preformed bags/pouch of LD, PP etc. |
Power requirement | 415 VAC, Three Phase. |
Material Construction | All contact parts SS304 & other parts of MS. |
Export Packing Size | 3.5’ (W) x 4’ (D) x 8’ (H) |
Net Weight (kg) | 200 |
Gross Weight (kg) | 350 |
* depending upon product & set weight. | |
A separate screw conveyor to feed auger hopper is recommended to maintain product level in auger hopper. | |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Packaging Material | Pouch |
| Capacity (Pouch per hour) | 0-500,500-1000 |
| Machine Type | Automatic, Semi-Automatic |
| Brand | Sensograph Packaging |
| Capacity | 25 Liters |
| Power Consumption | 415 VAC,Three phase |
| Automation Grade | Automatic |
| Condition | New |
In auger filler machine, the material to be filled is stored in the hopper. The stirrer of the machine facilitates the prevention of any bridging of the material. The Servo motor drive of the machine provides the perfection of accuracy and speed of the machine.
This machine is suitable for packing of
| TECHNICAL SPECIFICATION OF MACHINE: | |
| Product Characteristics | Powder form |
| Hopper Capacity | 25 Liters |
| Weighing Range | 5g to 5kg.* |
| Output | 72-1200 kg/hour. |
| Type of film | Heat sealable laminated plastic |
| Power Requirement | 415 VAC, Three phase |
| Material Construction | All contact parts SS304 & other parts of MS. |
| Roll width(mm) | 75 – 450 |
| Pouch length ( mm) | 150 to 330 |
| Vertical seal width(mm) | 10/15 typical |
| Horizontal Seal Width(mm) | 10/15 typical |
| Dimensions ( Floor Area) | 20 sq feet |
| Dimension ( Height) | 9 ft (Without Screw conveyor) |
| Power Supply | 3 Phase, 415 VAC |
| Air supply | 2 HP, 8 Bar Compressor |
| Film Draw mechanism | Servo /Stepper motor drive |
| Horizontal sealing mechanism | Pneumatic |
| Vertical seal mechanism | Pneumatic |
| Auger Screw Drive | Servo Drive |
| Hopper capacity | 25 Liters |
| Material of Construction | Powder coated MS frame with all contact parts in SS304 only. |
*Through different machine models.
Features:
* WE HAVE DIFFERENT MODELS COMPRISING VARIABLE PRODUCTION REQUIREMENT, FOR SMALL GRAMMAGES , HIGH GRAMMAGE ,HIGH SPEED MODELS AND ALSO ECONOMICAL MODELS.